Controller
Electrical Control System 222
1. Power button: When in off state, short press this button, the operation lamp lits brightly. When in on state,
short press this button, the operation lamp does not lit. If timer on or timer off has been set, it will not
cancel this setting.
When in on state, long press this button 2s or more, the wire controller enter into off state, If timer on,
timer off or weekly timer has been set, it will cancel this setting, related indicator is off.
2. Mode button: When press this button, the operation mode change as the following sequence:
Remark: For the cooling only model, the heating mode is skipped.
3. Adjust button(+,-): Press the button “+” or “-” to set indoor temperature, Indoor Setting Temperature
Range : 17~30℃(62~86℉/62~88℉(Depending on models..
4. Fan speed button: press this button consecutively; the fan speed will circle as follow:
Remark:This button is unavailable when in the mode of Auto or Dry
5,6.Swing button: First press, start swing function; second press, stop swing. (Match to some model with
swing function).
7. Follow me button: When under cool, heat and auto mode, press this button, follow me function is active.
Press again, this function is ineffective.
8.Timer button: Long press this button for 2s, enter week and clock time setting. Short press this button,
select timer mode as below:
Weekly timerOn timer Off timer On and off timer No timer Weekly timer On timer ……
9.Delay/Day off button: During the weekly timer, press the DAY OFF button to set the DAY OFF. The DAY
OFF setting is cancelled automatically after the set day has passed.
During the weekly timer, pressing the DELAY button once, display” ”, Press this button twice, display
“ ”,and wait 3 seconds to confirm. It means the unit will override 1 hours; Press this button three times,
display” ” and wait 3 seconds to confirm. It means the unit will override 2 hours.
10. Confirm button: Press the CONFIRM button to confirm the settings..
11. Back button: During the weekly timer, press the BACK button to back to last setting until quit the weekly
timer and save changed state automatically...
12. Copy button: During the weekly timer, press the COPY button, copy one day’s setting to the other day.
To Next Page
Loading...
Need help?
General