12 Remove the right upper door self-locking block
and the right door-open stopper. Store in a safe
place in case you need to reverse the door
position again.
Remove the two hole caps from the left side,
where the center hinge will go, and insert
them into the other side.
Attach the refrigerator door on the bottom
hinge, then attach the center left hinge to the
left side of the refrigerator.
13
14
Attach the left center hinge
15 Put the freezer door onto the center left hinge,
then attach the top left hinge to the top of
refrigerator. Cover the hinge with the top left
hinge cover and cover the screw holes on the
right side of the top with the cover plate you
previously removed.
16 Remove the screw caps on the door handles,
then remove the four Allen-screws securing
the handles to the left side of the doors with
the Allen wrench. Remove the handles.
Attach the top left hinge
17 Remove the four Phillips-head screws from
the left side of the door.
18 Screw the four Phillips-head screws into the
holes on the right side of the door.
19 Attach the handles to the right sides of doors
with the Allen-head screws you just removed.
Tighten with the Allen wrench and replace
the screw caps.
To Next Page
Loading...
Need help?
General
