http://www.midiplus.com.tw
1.2. Function
1.2.1. OCTAVE & PROGRAM
OCTAVE:
First to confirm the selection function is turned off when the 【SELECT/ENTER】 button, the
red light is off.
By pressing the Octave buttons, you will shift the active keyboard range one octave higher, or
lower. For example, if you want to change the octave 2 octaves down:Press Octave button
twice.
Press the 【UP】 button & 【DOWN】 button simultaneously to instantly reset the octave
value to "0".
PROGRAM:
First to confirm the selection function is turned on when the 【SELECT/ENTER】 button, the
red light is on.
By pressing the Program buttons, you can change sounds of EASY PIANO E2. For example, if
you want to change the sound 3 <Elec Grand Piano>:Press “Program +” button twice.
Press the 【+】 button & 【-】 button simultaneously to instantly reset the sound to
"1"<Grand Piano>.
1.2.2. VOLUME & DEMO
VOLUME:
First to confirm the selection function is turned off when the 【SELECT/ENTER】 button, the
red light is off.
Volume 【UP】 button &【DOWN】 button to adjust the volume upward increments
downward reduction.
Press the 【UP】 button & 【DOWN】 button simultaneously to instantly reset the volume
value to preset.
DEMO:
First to confirm the selection function is turned on when the 【SELECT/ENTER】 button, the
red light is on.
DEMO 【+】 button &【-】 button to adjust the demo play upward increments , downward
reduction.
Press the 【+】 button & 【-】 button simultaneously to instantly reset the demo play to
preset.