midiplus EASY PIANO - Chapter 2: Basic Operations; SELECT;ENTER and QUICKLY Functions; VOICE SELECT

MIDIPLUS Co, Ltd.
5
http://www.midiplus.com.tw
Chapter2. Basic Operations
2.1.1. SELECT/ENTER Functions
Whether you want to use special features are required to open the select function.
 SELECT：press the 【SELECT/ENTER】button, the red light is lit.
 ENTER：press the 【SELECT/ENTER】button, the red light is off.
2.1.2. QUICKLY Functions
EASY PIANO Quickly function is divided into four main categories, Voice selection, Octave
select, Velocity select, Reverb chooses according to your needs to make changes.
Their modes of operation are the same, as follows:
 First to confirm the selection function is turned on when the 【SELECT/ENTER】 button, the
red light is lit.
 Press the Quickly function key.
2.1.3. VOICE SELECT
There are two ways, as follows:
1.Quickly function select
 Press the 【SELECT/ENTER】 button, the red light is lit.
 Press the quickly function key(Quickly Sound：GRAND PIANO、BRIGHT PIANO、ELECT.
PIANO、HARPSICHORD、CHURCH ORGAN、STRING)。
 The red light is off when finished change the select voice.
2.PROGRAM CHANGE 【+/-】
 Press the 【SELECT/ENTER】 button. The red light is lit.
 PROGRAM CHANGE 【+/-】 button. The red light starts flashing.
 Press the 【SELECT/ENTER】 button. Finished change the select voice.
Note：change the current tone and timbre of the sound will be stored as a preset voice.