http://www.midiplus.com.tw
1.3. Basic settings
1.3.1. Connect drum accessories
1. Use the line to connect the drum to [TRIGGER INPUT].
2. Additional expansion [CARSH2],[CARSH3],[TOM4].
1.3.2. Connect headphones or speakers
1. Connect the headset.
The headphone jack is inserted [ ].
2. Connect the speakers.
The speaker wire is connected to the Output of [L] and [R] jacks (standard mono
audio).
1.3.3. Play the song USB disk(USB MEMORY)
After inserting a USB disk with MP3 or WAV songs, press the “SONG” button to
automatically search all the song files.
1.3.4. USB port
This jack is used to connect the keyboard with the computer, send MIDI messages directly
to the sound card (only drums Channel 10).
1.3.5. Restore factory settings
3. Factory reset all settings.
Before turning the first press [Edit], and then turn on the power switch.
4. The basic rhythm set to restore factory default settings.
Before turning to hold down [Kit], and then turn on the power switch.
5. Advanced Drum Set restores factory default setting.
Before turning to hold down [Mute], then turn on the power switch.
To Next Page
Loading...
Need help?
General
