Miditech i2-Control 61 Pro - MIDI SELECT and function keys

2.1.3 MIDI SELECT and function keys
Some keys on the keypad gives you direct access to this MIDI functions:
Velocity, Reverb Depth, Aftertouch, Pan, Volume, Set Ctrl, Reset,
Transpose single note up and down, MIDI channel, CC data, CC number,
Program number. To use this functions, simply press the MIDI Select button
and then the function you want to use. For example: Press the MIDI/SELECT
button, then the VOLUME KEY, and you can adjust directly the volume of the
keyboard with the DATA ENTRY slider. Another example: With the # and b
keys you can increase or decrease the notes by halftones. If you want to
transpose by 3 semitones: Press the MIDI/SELECT, then the # key, and use
the DATA ENTRY knob (in the display you see 3 for three semitones) then
press the MIDI/SELECT knob again to finish the change.
2.1.4 Reset key
Pressing the MIDI/SELECT button and the RESET key will send out a
message to return all external MIDI instruments to their default setting as well.
9