Miditech MIDIPLUS-61 - Operation Panel Guide; Pitch Bend and Modulation Wheels; Data Entry Slide

6
Part A. Operation panel:
1. Using the Pitch Bend Wheel:
The Pitch Bend wheel is used for raising or lowering the pitch of a
voice during performance. The range of pitch values depends on
the sound generator (sound card or module) being used. Please
refer to the manuals of your devices for information on how to
change the Pitch Bend range. To bend the pitch up, please move
the wheel away from you. To bend the pitch down, please move
the wheel towards you.
2. Using the Modulation Wheel:
It is very common to use the modulation wheel to change the
intensity of effects: mainly Vibrato( pitch change), Tremolo(
change the volume), and Modulation( change the tone). The
Modulation wheel produces a vibrato effect shortly after the sound
is generated. It is most effective for voice such as saxophone
strings and oboe.
3. Data Entry Slide: This slide controller allows you to adjust the
following parameters: Volume, Velocity, Chorus, Reverb, Pan pot,
and Aftertouch directly from your keyboard directly.