Midland ALAN 199 - Midland ALAN 199 Technical Specifications; ALAN 199 Receiver Specifications; ALAN 199 Transmitter Specifications

10 | Alan 199 Instruction Guide
TECHNICAL SPECIFICATIONS
RECEIVER
Frequency coverage ............................................................26.965 to 27.405 MHz
Sensitivity .....................................................better than 1.0 µV for 20 dB SINAD
Adjacent Channel Rejection ...................... 60 dB at 10 kHz; 70 dB for 20 KHz
Intermediate Frequency ........................ 1st IF=10.695 MHz; 2nd IF=455 KHz
Audio Output power .......................................................................... 4.5 watts max
Frequency Response (6dB) .................................................................450-2500 Hz
Cross Modulation ..............................................................................45 dB or better
Squelch .................................................................. adjustable from 1.2 µV to 1mV
Duty cycle..............................................................................................................5/5/90
TRASMITTER
Frequency coverage ............................................................26.965 to 27.405 MHz
Output Power ................................................................................................ 4 W / 1 W
Type of modulation .................................................................................................AM
Max modulation .....................................................................................................90%
Spurious Radiation ............................................................................62 dB or better
Frequency Tolerance ................................................................better than 0.002%
Antenna impedance .......................................................................................50 Ohm
Power supply ..................................................................................12,6 V ± 10%max
Max Current Drain .................................................................................................... 2A
Dimensions .......................................................................................124x38x190 mm
Weight .....................................................................................................................1.2 kg
Specifications are subject to change without notice.
A readily accessible disconnect device shall be incorporated in the installation wiring.
The disconnect device shall disconnect both poles simultaneously.