Arbeitsbereich Rauschsperre .....................................0,25 µV - 500 µV
NF-Wiedergabeleistung..............................................0,5 W an 8 Ohm, 10% THD
Widergabeverzerrungen bei 1000 µV.........................weniger als 8%
Wiedergabefrequenzgang ..........................................400 Hz - 2400 Hz
Zwischenfrequenzen...................................................1. ZF: 10,695 MHz
....................................................................................2. ZF: 455 kHz
Nachbarkanaldämpfung..............................................besser als 45 dB
Ruhestromaufnahme...................................................80 mA, Normalbetrieb
....................................................................................60 mA, Stromsparbetrieb
Sender
HF-Sendeleistung.......................................................4W FM schaltbar
Frequenztoleranz........................................................0,005 %
Unerwünschte Nebenaussendungen..........................besser als -70 dB
Modulation .................................................................. FM: 2,0 kHz
Stromaufnahme...........................................................900 mA
Die Änderung der Technischen Daten ohne vorherige Ankündigung im Zuge der
Weiterentwicklung bleiben vorbehalten.
ALAN 95 E80 PLUS
Your 80 channel Mobile CB represents the state-of-the art in high-tech engineering.
Designed for 80 FM Citizen Band Mobile operation, this compact package is big in
performance. Compact unit, is a quality piece of electronic equipment, skillfully
constructed from the finest components. The circuitry is all a solid - state, mounted
on rugged printed circuit boards. It is designed for many years of reliable, trouble -
free performance.Your mobile CB has a built 80 FM Channel Phase-Locked Loop
synthesizer circuit.
The PLL circuit achieves a new technique for generating all the required frequencies
with fewer crystals. The result is much tighter frequency control and superior
reliability.
FUNCTION AND LOCATION OF THE CONTROLS
1. Antenna connector: with BNC connector type. For better results, use a telescopic
antenna
2. "Squelch" Control: for the maximum receiver sensivity, the control must be
regulated exactly where the receiver background noise disappears.
3. On/Off Volume Control.
In ''off'' position your transceiver is off. Turn this control clockwise to switch on the
unit. Turn the knob clockwise a little more to set the audio level, until you get a
comfortable reception.
4. Multifunction backlighted display. This liquid crystal display has been
projected to show the operative modality:
a. channel selected number( from 1 up 80)
b. the received signal strenght and the power of the transmitting signal
c. AM/FM mode
To Next Page
Loading...
