3. Rotate the ON/OFF volume control clockwise to turn the unit on. Adjust the
volume for a normal listening level.
4. Adjust the SQUELCH control
5. Select the desired channel by the "UP/DOWN" or QUICK UP/QUICK/DOWN
buttons
Note: if the channel will not change,control that the "EMG" button has not been
pressed.In this case, press the the "EMG" button to disactivate this function.
If you wish to use scan, etc, refer to previous instruction.
To transmit: press and hold the PTT button, then talk to the microphone.
To receive: simply release the PTT button.
CAUTION: DON'T EXPOSE THE DISPLAY TO EXTREME TEMPERATURES
TECHNICAL SPECIFICATIONS
Frequency range......................................26.565-27.405 MHz.
Channels....................................................80 FM
Mode of operation......................................F3E (FM)
Antenna impedance ..................................50 ohm.
Loudspeaker ..............................................8 ohm 0.5W.
Microphone................................................condenser type
Power supply .............................................10.9V/15.6V,nominal 13.8V (9
batteries 10.8 V).
Dimensions ................................................40x50x170 mm.
Weight .......................................................280GR. (without batteries).
To Next Page
Loading...
