Midland BT2 Manual

3
UK
Midland BT2 is available in two versions:
Single BT2 Intercom kit with one unit only ›
BT2 Intercom TWIN with two units ›
Depending on the model purchased, the package contains
the following parts:
BT2 Intercom
1 BT2 communication unit ›
1 audio kit with two stereo speakers, microphone with ›
boom and wire microphone
1 plate with bi-adhesive strip to x the unit onto the helmet ›
1 clamp to x the unit onto the helmet ›
1 stereo audio cable to connect an iPod/ or other models ›
of MP3 players
1 miniUSB wall-mounting power supply ›
Wind Suppressing Foam Microphone Cover, Allen key and ›
Velcro strip for assembly
BT2 Intercom TWIN
2 BT2 communication units ›
2 audio kits with two stereo speakers, microphone with ›
boom and wire microphone
2 plates with bi-adhesive strip to x the unit onto the hel- ›
met
2 clamps to x the unit onto the helmet ›
2 stereo audio cables to connect an iPod/ or other models ›
of MP3 players
1 miniUSB wall-mounting power supply with double plug ›
Wind Suppressing Foam Microphone Cover, Allen key and ›
Velcro strip for assembly
The units included in the TWIN kit are already paired and
can therefore be immediately used in the Intercom mode.
Technical specications of Midland BT2
General:
Bluetooth ver. 2.0 stereo (Headset/Handsfree/A2DP pro- ›
tocol)
AGC system automatically controls the volume in relation ›
to background noise
Voice (VOX) or manual communications option ›
Private or shared (3-way communications) call mode ›
Manual controls to enable: telephone, intercom and wire ›
connection
Fully waterproof ›
Lithium battery with 8 hours talk time (1 week in standby ›
mode)
Recharge time: app. 4 hours ›
Dimensions. Length: 87 mm – Width: 47 mm - Thickness: ›
16 mm
Bluetooth connections:
Identical device for Rider to Pillion or Bike-to-Bike Intercom ›
mode, up to a maximum range of 200 meters
Bluetooth devices ›
- Mobile phone, GPS (Garmin Zumo and TomTom Rider 1
and 2), MP3 player Stereo (with A2DP protocol)
- PMR446 transceivers (with built-in or external Bluetooth
connection) for group bike-to-bike communications
Wire connections:
For stereo audio input (iPod/MP3 player) ›
For PMR446 transceivers (with optional cable) ›
Attention: before using BT2 for the rst time, remember
to recharge it for at least 4 hours.
Attention: Midland BT2 is designed to withstand rain and
water. However, if it is raining, always verify that the rub-
ber caps protecting the sockets are fully tted.
Midland BT2 Intercom
Thank you for purchasing the Midland BT2 Intercom, the rst truly wireless multimedia system for bikers.
The Midland BT2 is designed to be tted directly on to your helmet and to be used for communications with Bluetooth devices like
mobile phones, GPS Sat-Navs and MP3 players. If desired, it can also be paired with another Midland BT2 unit and used as wireless
Rider/Pillion Intercom system or Rider to Rider in bike-to-bike mode, within a maximum range of 200 meters. The Midland BT2 is
also supplied with a wired connection that can be used to connect an iPod/MP3 player or PMR446 transceiver,which will then enable
bike-to-bike communications up to a maximum range of 5 km.

Midland BT2 Specifications

General

Brand	Midland
Model	BT2
Category	Intercom System
Language	English