EC Certificate of Conformity
(to EC Directive 99/5 -2004/108- 2006/95/EC)
DO:
Rev:
7.1.4.4
5
Authorised on: 02/02/2010
By : S. Peterlini
Signature
This document is owned by Cte International srl. It is forbiddeen to reproduce or diffuse it without the authorisation of the Quality
Assurance Manager of CTE International srl.
DECLARATION OF CONFORMITY N° 2013050703 Rev 2
Manufacturer: C.T.E. International S.r.l.
Address: VIA SEVARDI 7 – ZONA INDUSTRIALE MANCASALE – 42124 REGGIO EMILIA
Products Name:
BT X1
Product Type: BLUETOOTH HEADSET INTERCOM
Brand : MIDLAND
The product described above is in conformity with the following Specifications based on sample testing:
Item of
99/05/CE
Standard
Title Edition
or date of
issue
3.1a EN 60065 :2002
+A1+A11
+ A2+A12
Audio, video and similar electronic apparatus - Safety requirements
2011
3.1a EN 50371
Generic standard to demonstrate the compliance of low power electronic
and electrical apparatus with the basic restrictions related to human
exposure to electromagnetic fields (10 MHz - 300 GHz) - General public
2002
3.1b EN 301 489-1
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services; Part 1: Common technical requirements
V1.9.2
3.1b EN 301 489-17
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part
17: Specific conditions for Broadband Data Transmission Systems
V2.2.1
3.2 EN 300 328
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wideband transmission systems; Data transmission equipment operating
in the 2,4 GHz ISM band and using wide band modulation techniques;
Harmonized EN covering the essential requirements of article 3.2 of the
R&TTE Directive
V1.8.1
Supplementary information to the conformity assessment result on which the declaration is based:
Conformity assessment procedures are referred to art. 10(4) linked with Annex III of Directive 1999/5/ec.
The test sample fullfils the requirements specified above, on the basis of test result and their evaluation.
The product herewith complies with the essential requirements of EC Directive 99/05/EC, 2004/108/EC and
following implements and modifications, 2006/95/EC and following implements and modifications, 93/97/EC.
Reference to any marking or other indication (e.g. on the product) is exhibited in attachment to this
declaration.
Reggio Emilia, 07/05/2013
CTE International srl
Quality Assurance Manager
Peterlini Stefano
To Previous Page
Loading...
