Midland BTX2 PRO S/-LR - Pairing 4 Units in Conference Mode; Pairing with Phone or GPS Device

PAIRING TO A PHONE/GPS
Status: Setup mode
1
2
3
3” 3” 3”
1
2
3
Press 3 seconds
Blinking
Select device on
the phone
Steady 1 second,
pairing successful
Note: the unit paired to Vol- is in background to the
intercom. To pair the unit and interrupt the intercom,
repeat the procedure but press Vol+.
PAIRING 4 UNITS IN CONFERENCE
Status: Setup mode
1
2
3
3” 3” 3”
1
2
3
Note: the Conference mode allows the simultaneous
communication amongst units.
All units must be paired in a “chain” configuration: the
Backwards button of the first unit must be paired to
the Forwards button of the second unit and so on.
For a detailed description of the function go to para-
graph “Conference” of the complete user manual.
PAIRING