Need help?Do you have a question about the Midland BTX2 PRO S/-LR and is the answer not in the manual?
Procedure to turn the device on, including button presses and visual/audio feedback signals.
Procedure to turn the device off, including button presses and visual/audio feedback signals.
Overview of the pairing process, including types of connections and compatibility.
Procedure to initiate the device's pairing mode by pressing specific buttons for 7 seconds.
Steps to exit the pairing setup mode or cancel an ongoing pairing process.
Procedure to reset all previously established Bluetooth pairings on the device.
Instructions for pairing the device with other Midland intercom units.
Guide to pair the device with intercoms from other manufacturers (Universal Intercom).
Steps to establish a conference connection among four paired units.
Instructions for pairing the device with a Bluetooth-enabled phone or GPS navigator.
Functionality for direct communication between two or more units.
Functionality for making calls and managing audio playback from a connected phone.
Functionality to listen to, seek, and store FM radio stations.
Procedure to switch between Intercom, Phone, and FM Radio modes.
Steps to manually initiate or terminate an intercom connection.
How to use voice commands ('Hello') to control intercom functionality.
Steps to manage intercom connections with other brand devices.
Procedure to activate or deactivate the voice-activated intercom feature.
How to activate or deactivate the conference communication feature.
Steps to initiate or terminate conference calls with paired units.
Instructions for initiating a phone call using the device.
Procedures for answering incoming calls and ending active calls.
How to decline an incoming phone call.
Controls for playing, pausing, and skipping tracks in music playback.
Using Vol+/Vol- buttons to control music playback on paired devices.
Switching between public sharing and private listening modes for intercom audio.
Instructions for turning the FM radio on/off and scanning stations.
How to manually tune to the next or previous radio station and manage memory presets.
To Next Page
General