Midland BTX2 PRO S/-LR - Reset All Pairings; Pairing with Midland Units; Pairing with Different Brand Units

PAIRING TO A MIDLAND UNIT
Status: Both units in setup mode
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
Press 3 seconds
(start procedure on
both units at the
same time)
Blinking
Steady 1 second,
pairing successful
Steady,
pairing complete
Note: To pair other Midland units, follow the same
procedure but press buttons 1 or 3.
TO RESET THE PAIRING
Status: Setup mode
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
Press 3 seconds at
the same time
Lights up
Steady led
3”
3”
PAIRING TO A DIFFERENT
BRAND UNIT
Status: Setup mode
1st Unit
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
Press 7 seconds
(start procedure on
both units at the
same time)
Blinking fast
(keep pressed)
Blinking slowly
(release)
Steady,
pairing complete
2nd Unit
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
Follow the “phone”
pairing procedure
Note: to pair another Universal Intercom, follow the
same procedure but press Button 3.
7”
PAIRING