24
ENGLISH
10 CUSTOMIZATION
10.1 Menu settings
NEPTUNE can carry out a series of settings in order to personalize the transceiver to your requi-
rements and to insert the necessary data to its operation.
10.2 Navigation in the menu of settings
To access the menu of setting use the functions keys.
All programmed settings are stored in non-volatile memory.
10.3 List of settings
Following find the possible settings:
Menu Items Description Par.
Log
Call directory of stored DSC calls type individual or distress cal-
ls.
10.4
Dir
Directory of MMSI owner names, MMSI codes and their detai-
ls.
10.5
Posn
Manual programming of coordinates and the UTC time setting
(in the absence of GPS).
10.6
LCD
Display contrast adjustment.
10.7
Beep
Adjustment of keypad beep
10.8
ZONE
Local and UTC time deviation settings.
10.9
MMSI
Entry of your individual MMSI code and you MMSI group code.
10.10
ATIS
Entry of your indiviual ATIS code (for navigation in inland wa-
terways) and switching on/off the automatical transmission of
the signal
10.11
10.4 “ Log” (list of registered calls)
With this menu you can consult a directory of the latest registered calls, in analogous way to the
registers of calls on a cellular phone.
1. Press the function key “DSC”.
2. Press the buttons “DSC” and “Log”. It will be shown the latest registered message.
3. By pressing the function key corresponding to “Back” all the other registered messages will be
shown.
4. Using the function keys corresponding to the symbol “ ” you will get some more informations:
coordinates and time.
To Next Page
Loading...
