8 | XT10 instruction guide
Menu button
The following functions can be selected by pressing the Menu button:
• VOX
• Roger Beep on/o
• Channel setting
• CTCSS tone setting
• Keypad Beep on/o
VOX function
The VOX function lets you open the transmission by voice without the use of
the PTT button.
Push the Menu button for three times; “VOX” will be displayed and ‘oF’ will
blink. Select ‘on’ by means of the ▲/▼ buttons and then press the PTT button
to confirm.
To disable the VOX mode
Press the Menu button for three times. “On” blinks on the display. Select ‘OF’
by means of the ▲/▼ buttons and then push PTT to confirm.
Roger Beep: End transmission tone
When the PTT is released the radio will beep to confirm to other users that
your transmission is finished. This feature is enabled by default.
To disable it:
1. Press the Menu button till the display shows “rb on”
2. Select “oF” by means of the ▲/▼ buttons.
3. Confirm your selection by pushing the PTT button.
Channel setting
Press once the Menu button and then select the desired channel by the ▲/▼
buttons. Press PTT to confirm the selection.
To Next Page
Loading...
Need help?
General
