Installation Options
Preva
4
X-ray Protection
X-ray equipment can cause injury if used improperly.
The instructions contained in this manual must be read and followed
when operating the Preva. Your Midmark Dental dealer will assist you
in placing the Preva in operation.
The Preva Dental X-ray System provides a high degree of protection from
unnecessary radiation. However, no practical design can provide complete
protection nor prevent operators from exposing themselves or others to
unnecessary radiation.
Attention
The equipment must only be installed and operated in accordance with the
safety procedures and operating instructions given in this manual and in the
User Manual for the purposes and applications for which it was designed.
Modifications and/or additions to the equipment may only be carried out by
Midmark Corp. or by third parties expressly authorized by Midmark Corp. to
do so. Such changes must comply with legal requirements as well as with
the generally accepted technical rules. It is the responsibility of the user to
ensure that existing legal regulations regarding installation of the equipment
with respect to the building are observed.
Your Responsibilities As An Installer And Service Engineer
Verification of machine performance after installation must be performed
according to the guidelines identified in the “System Function Checklist” which may
be found in the User Manual or, the Installation and Service Manual on page 52.
Verification of machine performance after maintenance or repair must be
performed according to the guidelines identified in the “System Function Checklist”
and the calibration instructions which may be found in the Installation and Service
Manual on page 52.
To Next Page
Loading...
