10
11
Step 10.
Place the white wire tie #6-
014-2 through the second
large inset screw hole on the
right side busbar.
Step 11.
Using a wire tie, secure the
plastic hardware bag, slip-
ping the busbars in the bag
under the dinrail and pulling
the wire tie, snug.
Fuse adapter #5-035-1
4 x 6 Plastic bag
#9-048-2
Fuse busbar #3-079-1
Breaker busbar #3-079-1
2x3.2 Plastic bag
#9-111-1
Two 1/0 12 Lug
#9-075-1
Two pan head screw #6-059-1
10-32 x 1/4
Lock washer
#10 internal tooth
#6-017-1
HARDWARE KIT
To Next Page