Midtronics WALMART GR8-1150

5:/057
0LWL,06WWL,
LWL

GlWRSR
The EDIT COUPON utility allows you to create and store
a promotional coupon or message on the printed test
results you give tor your customers. The utility’s two
information screens contain eight lines of text with a
maximum of 17 characters per line. To enable and dis-
able the inclusion of the text on your test results, use
the COUPON utility.
To create and edit a coupon, see the procedure under “Shop”
in this chapter for using the keypad to enter and backspace
over characters.
To help you edit and center your coupon, use a pencil to write the information in the template below before entering it into the
Battery Diagnostic Station.
SHSDWH
/LQH
/LQH
/LQH
/LQH
/LQH
/LQH
/LQH
/LQH
7HPS
The TEMP. UNITS utility allows you to set the units of
measurement to either Fahrenheit or Celsius. To set
your preference:
1. Use the UP or DOWN ARROW key, or press the corre-
sponding numerical key (1 or 2) to move the dot to the
option button of your choice.
1

DEGREES F
2

DEGREES C
2. If you used the ARROW keys, press the SAVE soft key to
save your setting or the BACK soft key to return to the Ad-
min / Utility Menu without saving the changes.
If you use the alphanumeric keypad to enter the number
preceding the option button, no additional keypress is needed
to save your selection.
7UDFNDOOV
The TRACK CALLS utility stores the test results and test
codes by date as an .xml (Extensible Markup Language)
le in a folder named ”XML” on the data card.
This utility requires an SD card reader (not included) to read
or transfer the le to a PC. You can open the le in Microsoft
®
Internet Explorer
®
. The data in the le is separated by tags
(identiers enclosed in angle brackets) that dene the data.
NOTE: To avoid corrupting the le, copy rather
than move the le to your PC.
The default is OFF. To set your preference:
1. Use the UP or DOWN ARROW key, or press the corre-
sponding numerical key (1 or 2) to move the dot to the
option button of your choice.
1

TRACKING OFF
2

TRACKING ON
2. If you have used the ARROW keys, press the SAVE soft key
to save your setting or the BACK soft key to return to the
Admin / Utility Menu without saving the changes.
KDSWHU$GPL8WLOLW0HX