Midtronics WALMART GR8-1150

5:/057
0LWL,06WWL,
LWL

If you use the alphanumeric keypad to enter the number
preceding the option button, no additional keypress is needed
to save your selection
NOTE: Over time disk access slows as the data card
reaches its capacity. To free up card space, transfer
the les to a PC and reformat the card to permanently
erase data no longer needed.
/DDH
The LANGUAGE utility allows you to select a language
for the display and printouts. You can override the
selection when the Battery Diagnostic Station dis-
plays the language option after you turn it on or print
results.
To set your preference:
1. Use the UP or DOWN ARROW key or press the corre-
sponding numerical key (1, 2, or 3) to move the dot to the
option button of your choice.
1

ENGLISH
2

ESPAÑOL
3

FRANÇAIS
2. If you used the ARROW keys, press the SAVE soft key to
save your setting or the BACK soft key to return to the Ad-
min / Utility Menu without saving the changes.
If you use the alphanumeric keypad to enter the number
preceding the option button, no additional keypress is needed
to save your selection.
GPl
Select the ADMIN icon to display a list of administra-
tive functions:
1

OPTIONS
2

CLEAR TEST TOTALS
3

RESET DEFAULTS
4

CHANGE ADMIN PIN
2SWLRV
In the OPTIONS section there are four functions that allow you
to control user access to the Main Menu and Admin / Utility
Menu. Each option is easily enabled or disabled by turning it
ON or OFF. To save your settings after each selection, press the
SAVE soft key. To return to the administrative functions list
without saving, press the BACK soft key.
1 – USER ID
Select this setting to enable (ON) or disable (OFF) the
USER ID login screen.
2 – UNREG. USER
Select this setting to enable (ON) or disable (OFF) unregis-
tered login access to the Battery Diagnostic Station.
3 – PRINT HEADER
Select this setting to enables or disable printing of the
header you created using the Shop Utility (page 21).
4 – ADMIN PIN
Select this setting to enable (ON) password protection for
ADMIN mode
OHDU7HVW7RWDOV
This function allows you to clear the test totals by User ID and
battery test decision. The Battery Diagnostic Station veries
that you want the counter reset to 0 before it continues.
NOTE: This will not clear the lifetime test total
available in the VERSION information screen.
5HVHWHIDXOWV
This function allows you to reset Administrative options to
their original settings. It will clear all registered users.
2SWLR HIDXOW6HWWLV
86(5, 21
815(86(5 21
35,17((5 21
KDSWHU$GPL8WLOLW0HX