,
If there is a large volume of hot
water in the wash cabinet when a
program is interrupted, and the lab
washer door is closed too quickly,
hot water can leak out.
There is the risk of scalding and
burning.
If the water temperature in the trap is
below 104°F (40°C) :
^
Press the +C button.
The program continues.
If the water temperature in the trap is
over 104°F (40°C):
^ Press the OK button.
THe program is stopped and the
display will show:
Program canceled
Water drained.
Once all the water has drained the
program can be restarted.
Operation
43
To Next Page
