Periodical maintenance for this lab
washer is offered by Miele Professional
Technical Service.
After 1000 operating hours or at least
once a year is the recommended
interval.
The maintenance covers the following:
–
Electrical safety
–
Door mechanism and door seal
–
Threads and connections in the
wash cabinet
–
Water inlet and drain
– Internal and external dispensing
systems
– Spray arms
– Triple Filter System
– Drain pump and non-return faucet
– Steam condenser:
– All mobile units, baskets and inserts
If available:
–
Connected printer
Part of the maintenance is a function
check:
–
A program is run as a test
–
A thermoelectrical measurement
–
A leak tightness check
–
All safety relevant measuring
systems (Display of faults)
Contact Miele Professional
Technical Service at 800-991-9380
for details.
Routine checks
The routine checks must be done daily
by the user before using the machine.
For the routine checks a checklist is
equipped with the washer.
Check the following points:
–
the filters in the base of the wash
cabinet,
–
the spray arms in the machine and at
the mobile units and inserts,
–
the wash cabinet and the door seal,
–
the mobile units, baskets and inserts,
and
– all safety equipment.
Maintenance
45
To Next Page
