~
If the cleaning result is subject to
particularly stringent requirements
(e.g. chemical analysis), a regular
quality control test should be carried
out by the user to ensure that the
required standards of cleanliness are
being achieved.
~
The mobile units and special inserts
should only be used for their specific
application.
~
Empty any containers or utensils
before arranging them in the machine.
~
Do not allow any remains of acids,
solvents or corroding ferrous material,
and in particular hydrochloric acid or
chloride solutions to get into the wash
cabinet. Similarly avoid any materials
with a corrosive effect. The presence in
compounds of any solvents should be
minimal, (especially those in hazard
class A1).
~
To avoid any corrosion damage
ensure that solutions or steam
containing hydrochloric acid do not
come in contact with the stainless steel
casing of the machine.
~
After work on the mains water
supply, the water supply line to the
machine must be vented.
Machine components may otherwise be
damaged.
~
Please follow the installation advice
in these instructions and the separate
Installation Instructions.
Using accessories
~
Only Miele accessories should be
connected to this machine. Consult a
Miele Application Specialist on the type
and application of such equipment.
~
Only Miele mobile units, modules
and inserts should be used. If
equipment from another manufacturer
is used, Miele cannot ensure the
cleaning results. Damage or injury
caused by this are excluded from the
warranty.
Please note the following symbols on
the machine:
Caution : See the Operating
Instructions!
Caution : Danger of electric
shock!
IMPORTANT SAFETY INSTRUCTIONS
7
To Next Page
Loading...
