Need help?Do you have a question about the Miele Allerdry T 4464 C and is the answer not in the manual?
General| Delay start | Yes |
|---|---|
| Child lock | Yes |
| Color | White |
| Appliance type | Tumble dryer |
| Loading type | Front load |
| Colour of appliance | White |
| Dimensions (HxWxD) | 850 x 595 x 580 mm |
Instructions for environmentally friendly disposal of packaging materials and keeping plastic bags away from children.
Guidance on disposing of old electrical appliances responsibly and at designated collection points.
Advice on reducing energy consumption during drying, including spin speed and load size.
Safety precautions related to electrical connections, earthing, and avoiding extension leads for safe appliance operation.
Specifies the intended use of the tumble dryer for fabrics washed in water and suitable for tumble drying.
Information on authorized repairs, genuine spare parts, and handling faulty connection cables to maintain safety standards.
Advice on keeping the machine clean in areas prone to pest infestation, as damage is not covered by guarantee.
Procedures for completely isolating the machine from the electricity supply during fault or cleaning.
Guidelines on proper operation, including not using without filters, avoiding frost, and maintaining correct ambient temperature.
Lists textiles that must not be dried to prevent fire risk, such as rubber or items treated with flammable agents.
Emphasizes that the machine is not a toy and instructs to keep children away and supervise use.
Guidelines on using only Miele-approved accessories and instructions for disposing of the old machine.
Explains the function of the delay start button for delaying the start of a programme by up to 24 hours.
Describes how to start a programme and the indicator light behavior.
Information about what the display shows, including programme duration and delay start time.
How to select or deselect additional options like Low temperature or Short.
How to select time for timed drying programmes (Cool air, Warm air).
Explains how the programme selector can be turned to choose a programme.
Indicates the current stage of the drying programme.
Refers to the problem-solving guide for details on indicator lights.
Button to switch the appliance on/off or interrupt a programme.
Button to open the door or cancel a programme.
Brief description of standard, allerdry, special smoothing, and timed drying programmes.
Details what the display shows, including programme duration and delay start time.
Explains factors affecting the estimated drying time and how it can change.
Describes the interface used by service technicians for testing and programme updates.
Mention of functions for changing standard settings.
How the drum light operates when the door is opened.
Explains the circulation of drying air, condensation, and water collection.
Details the role of the hygiene filter in cooling the condenser unit and its replacement.
Guide to understanding drying symbols on care labels and the risks of drying without them.
General advice on drying, including load limits, spinning, and specific fabric care.
Advice on drying woollens, down-filled, linen, loopknit, minimum iron fabrics, and dark colours.
Introduces the operating sequence using numbered steps for guidance.
Steps for sorting laundry based on drying level, fabric type, size, and moisture.
How to switch the dryer on using the I-On/0-Off button.
Instructions on loading laundry, avoiding overloading, and checking fluff filter position.
Guide to selecting programmes like Cottons, Minimum iron, Woollens, and Timed drying.
How to select time duration for Cool air and Warm air timed drying programmes.
How to select duration for the Timed drying - Hygiene programme.
How to select options like Low temperature, Short, and Buzzer.
Details on using the Short programme for fabrics with higher temperatures.
Guidance on using the Low temperature setting for delicates.
How to use the buzzer, adjust its pitch, and its behavior during faults.
Instructions on how to set a delay start for programmes up to 24 hours.
How to start the drying cycle using the Start button and indicator lights.
Steps for removing laundry, cleaning fluff filters, closing door, and emptying container.
Step-by-step guide to setting a delay start for programmes up to 24 hours.
How to start the countdown for a delayed programme.
Instructions on how to add laundry while the delay start is counting down.
Methods to cancel a delay start, either before or after pressing Start.
Details on Cottons Normal+, Normal**, Hand iron, Machine iron, and Minimum iron programmes, including fabric type and load.
Specifics for Minimum iron programmes regarding fabric type, notes, and additional options.
Information on Warm air and Cool air timed drying programmes, including fabric types and options.
Details on the Smoothing programme for fabrics like cottons and linen, including notes and options.
Information on the Woollens hand care programme for woollen fabrics, including notes and options.
Explains the purpose of allerdry programmes for deactivating micro-organisms and reducing allergens.
Specifics for the Allerdry Cottons programme, including fabric type and suitability.
Details for the Allerdry Minimum iron programme, including fabric type and suitability for delicate fabrics.
Information on the Allerdry Pillows programme for drying pillows with feather, down, or synthetic fillings.
Guidance for the Allerdry Timed drying - Hygiene programme for airing items or deactivating dustmites.
Explains that programmes cannot be changed mid-cycle and how to reset.
Steps to switch the dryer off and on to interrupt and continue a programme.
Instructions for adding or removing items during a programme, with a warning about hot drums.
Steps to select a new programme after cancelling the current one.
Detailed procedure for emptying the condensed water container after each cycle.
Notes on condensed water not being drinking water and its potential household uses.
Instructions for cleaning fluff filters while dry, using fingers or a vacuum cleaner.
Method for cleaning compacted fluff filters under running water, with a drying warning.
How to clean the exterior housing, control panel, and drum.
Step-by-step guide for replacing the hygiene filter, including accessing the holder.
Procedure to reset the filter counter after replacing the hygiene filter.
Explains how detergent, hair, and fluff can block the condenser unit and the need for cleaning.
Detailed steps for removing the condenser unit for cleaning.
How to check the condenser unit for fluff by holding it up to the light.
Instructions for rinsing the condenser unit using a shower head.
Steps for correctly reinserting the condenser unit and locking the cover.
Troubleshooting common issues like the dryer not starting or static electricity.
Solutions for fluff build-up, laundry not drying sufficiently, and damp pillows.
Addresses issues like insufficient ventilation, blocked filters, or insufficient spinning.
Troubleshooting for service panel not shutting, water leaks, and interior drum lighting not working.
Explains indicator lights and fault messages like 'Clean out airways' and 'Empty out container'.
Covers behaviour of filter change, allerdry, and programme interruption indicators.
Explains the 'Bars -...-...' display for the remaining time when the process is not yet complete.
Step-by-step instructions for replacing the interior drum lamp, including safety precautions.
Information on how to contact Miele dealers or service departments for faults or guarantee issues.
Describes the PC interface used by technicians for testing and programme updates.
Refers to the guarantee card supplied with the machine for warranty details.
Information on where to purchase optional accessories from Miele.
Labeled diagram showing the front view of the dryer and its key components.
Advice on choosing a suitable location, ensuring ventilation, and avoiding heat build-up.
Guidance on how to safely move and handle the machine during transport.
Instructions for installing the dryer under a worktop, including ventilation and building under kits.
Instructions for securely refitting the lid after it has been removed for installation.
Importance of levelling and how to adjust the screw feet for stability and operation.
Warning about not blocking the opening for room air intake to the hygiene filter panel.
Emphasizes the need for adequate room ventilation to prevent increased running times and energy consumption.
Information on combining the dryer with a washing machine using a stacking kit.
Advice on running a Cool air programme before moving the machine to manage condensed water.
How to set up the drain hose for direct drainage to a sink or drain outlet.
Detailed steps for uncoupling and pulling out the drain hose, with kink warnings.
Connecting the drain hose directly to a sink drain outlet using adapters.
Instructions for securing the drain hose if external drainage is no longer desired.
Guidelines for UK electrical connections, including qualified personnel and socket requirements.
Information on fuse replacement and safety for BS 1363 plugs.
Mandatory warning emphasizing that the appliance must be earthed.
Table detailing energy (kWh) and time (minutes) consumption for various programmes and spin speeds.
Specifications for height, width, depth, and weight of the dryer.
Details on drum volume, maximum load capacity, and condensed water container size.
Details on hose length, cable length, voltage, and connected load.
Information on radio/TV suppression and VDE certifications.
How to adjust the residual moisture level for drier laundry in Cottons programmes.
How to adjust residual moisture for drier laundry in Minimum iron programmes.
How to activate or deactivate the anti-crease function for preventing creasing.
How to activate the memory function to store programme and option settings.
How to increase the cooling down phase for easier garment handling.
How to deactivate the 'Clean out airways' indicator light.
To Next Page
