EasyManua.ls Logo

Miele t 8302 User Manual

Miele t 8302
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating instructions
for vented tumble dryer
T 8302
To avoid the risk of accidents
or damage to the appliance
it is essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 07 868 650
en-GB

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Miele t 8302 and is the answer not in the manual?

Miele t 8302 Specifications

General IconGeneral
Loading typeFront-load
Product colorWhite
Appliance placementFreestanding
Current16 A
Connected load2650 W
AC input voltage220 - 230 V
AC input frequency50 Hz
Energy consumption4.1 kWh
Cycle time71 min
Drum capacity6 kg
Maximum spin speed1400 RPM
Anti-Crease functionYes
Weight and Dimensions IconWeight and Dimensions
Depth580 mm
Width595 mm
Height850 mm
Weight45000 g

Summary

Caring for the environment

Disposal of the packing material

Guidance on environmentally friendly disposal of transport and protective packing materials.

Disposal of your old appliance

Instructions for safely disposing of old electrical and electronic appliances.

Energy saving tips

Advice on reducing energy consumption during drying cycles.

Warning and Safety instructions

Correct application

Specifies the intended use of the tumble dryer in domestic households.

Safety with children

Guidelines for ensuring child safety around the tumble dryer.

Technical safety

Covers essential safety checks for electrical installation and components.

Correct use

Details textiles that must not be dried to prevent fire hazards.

Accessories

Information on using only genuine Miele original spare parts and accessories.

Control panel

Control Panel Overview

Explanation of the buttons, indicators, and programme selector on the control panel.

Notes on laundry care

Care symbols

Explanation of drying symbols found on garment care labels.

Tips on drying

Practical advice for effective and safe drying of various fabrics.

How to dry correctly

Step-by-Step Drying Guide

Detailed instructions for sorting, loading, and starting the drying process.

Programme Selection and Management

Guidance on selecting programmes, low temperature drying, and starting cycles.

Programme Sequence Changes

Instructions for cancelling or changing programmes mid-cycle.

Programme chart

Programme Types and Loads

Overview of available programmes, fabric types, and maximum load capacities.

Cleaning Instructions

Procedures for cleaning the fluff filter, door grilles, and the dryer itself.

Problem solving guide

General Problems and Solutions

Troubleshooting common issues like programme not starting or static electricity.

Check and Fault Messages

Interpreting indicator lamps and buzzer sounds for fault diagnosis.

Changing the Interior Lamp

Step-by-step guide for replacing the drum interior light bulb.

After Sales service

Repairs and Contact Information

Guidance on contacting Miele for repairs and service.

Appliance Guarantee and Accessories

Information on warranty, future updates, and available optional accessories.

Installation and connection

Front and Rear Views

Identification of key components and connections from the front and rear.

Installation Site and Transport

Guidelines for selecting a site, moving, and building under the appliance.

Levelling and Stacking

Instructions for ensuring the appliance is level and for washer-dryer stacking.

Electrical connection

UK Electrical Connection Details

Information on mains connection, plugs, fuses, and earthing requirements in the UK.

Installation - venting

General Venting Requirements

Essential information and considerations for installing a venting system.

Duct Length and Diameter Calculation

Methods for calculating total duct length and determining required internal diameter.

Venting System Installation Examples

Illustrative examples for installing venting to the rear, left, or right sides.

Flexible Ducting Hose Installation

Instructions for fitting a flexible ducting hose to vent moist air outside.

Plastic Piping Installation

Guidance on using plastic piping for venting, including adapters and connections.

Direct Wall Vent Connection

Steps for connecting the dryer directly to an outside wall vent.

Consumption data

Programme Energy and Time Consumption

Table detailing energy usage (kWh) and drying times (minutes) for each programme.

Technical data

Appliance Specifications

Key dimensions, weight, capacity, and electrical data of the tumble dryer.

Programmable functions

Altering Residual Moisture Levels

How to adjust residual moisture for Cottons and Minimum iron programmes.

Anti-crease Function Settings

Instructions for activating, deactivating, or adjusting the anti-crease duration.

Buzzer Activation/Deactivation

Guide to turning the end-of-programme buzzer on or off.

Drying Level Adjustment (Automatic)

How to change the default drying level in the Automatic programme.

Extending Cooling Down Time

Steps to lengthen the cooling down phase for easier garment handling.

Standby Mode Settings

Configuration options for the standby function and indicator lamps.

Related product manuals