Cleaning the powder detergent
container c
Cleaning the dosing cog
If left standing for a long time,
powder detergent can clump
together in the dosing cog.
Check the cog regularly and clean it
once a month.
^
Remove the lid.
^
Pour any remaining powder
detergent into another container to
keep it for future use.
^
Turn the container over.
^
Use a screwdriver to undo the two
screws in the lid of the detergent
compartment and lift off the lid.
^
Remove the cog and clean it with hot
water.
^
Dry it with a soft cloth.
The cog must be dry to prevent the
powder detergent clumping
together.
^
Replace the cog by carrying out the
above procedure in the reverse
order.
^
Tighten the screws.
Cleaning and care
14
To Next Page
Loading...