Problem Possible cause Remedy
The 2 indicator light
is on constantly.
The empty residual
water container has
not been recognised.
Empty the residual water
container completely and dry it
out. Insert the residual water
container after a short interval
(approx. 20 seconds) making
sure that it clicks into place.
Clean and dry the metal
contacts on the residual water
container and replace the
container.
If the indicator light is still on, call
Miele Service.
The steam function
on the iron or steamer
does not work.
The appliance has
not been switched
on.
Connect the appliance to the
mains electricity supply and
switch it on with the On/Off
button s .
The iron or steamer
is not connected.
Connect the steam hose to the
steam connection on the tower.
The water container
is empty or missing.
Fill the water container with fresh
tap water, replace it and wait for
the * indicator light to signal that
steam is ready.
The steam is not
ready.
Wait until the * indicator light
signals that steam is ready.
The indicator lights
are showing that
there is a fault.
Remedy the fault as explained
on the following pages.
If still no steam is produced, call
Miele Service.
Problem solving guide
63
To Next Page
Loading...
