EasyManua.ls Logo

Miele B 3312 - User Manual

Miele B 3312
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating instructions
Steam ironing system
To avoid the risk of accidents or damage to the appliance, it is essential
to read these instructions before it is installed and used for the first time.
en-AE,SA M.-Nr. 10 637 021

Table of Contents

Questions and Answers

  • L
    Linda BrownAug 11, 2025
    What to do if my Miele B 3312 says 'Unplug at mains'?
    • N
      Nicole ZimmermanAug 11, 2025
      If your Miele Iron displays the message 'Unplug at mains', it indicates an electronic fault. Turn off the iron at the wall socket and remove the plug. After a short wait, reinsert the plug and switch the iron back on. The system will attempt to correct the fault. If the message persists after these steps, turn off the iron at the wall socket, remove the plug, and contact your Miele dealer.
  • S
    Steven PetersAug 20, 2025
    What to do if my Miele B 3312 displays a 'Memory fault Switch off/ on' error?
    • A
      Alison CaseyAug 20, 2025
      If your Miele Iron displays a 'Memory fault Switch off/ on' error, it means there is a fault. Press the ? button to switch the steam ironing system off and then back on again. The steam ironing system must now be reset. Complete the steps required when using for the first time. If the fault message continues to be displayed, contact your Miele dealer.
  • S
    Shawn CollierAug 31, 2025
    What to do if my Miele B 3312 Iron displays a 'Drain valve fault Switch off/on' error?
    • D
      Diane WallaceAug 31, 2025
      If your Miele Iron displays a 'Drain valve fault Switch off/on' error, it means that the descaling or rinsing processes have not been carried out properly. Press the ? button to switch the steam ironing system off and then back on again. If the fault message continues to be displayed, contact your Miele dealer.

Miele B 3312 Specifications

General IconGeneral
Roller diameter160 mm
Roller length830 mm
Variable roller speedYes
FoldingYes
Voltage220-240 V
Heating methodElectric
Power3500 W
TypeRotary Iron
Connected load3500 W

Related product manuals