Dismantling
46
Disconnecting the steam hose.
Do not pull on the steam hose!
Hold the plug at the end of the steam
hose. The plug may still be warm
immediately after using the system.
Pull back the slider located on the
side of the steam hose plug.
Hold the slider back.
Withdraw the plug from the steam
connection.
After withdrawing the plug, drops of
water may escape from the steam hose.
Storing the iron
The iron soleplate is still very hot
after use!
Avoid direct contact.
Allow the iron to cool down after use.
Do not stow the iron away while it is
still attached to the hose.
Place the iron on the resting surface
on the tower and let the iron cool
down.
When cool, store the iron and the
steam hose holder in the (upper)
storage compartment.
Storing the steamer
Never put the steamer away while it
is still connected to the steam
system.
Store the steamer in the (bottom)
storage compartment.
To Next Page
Loading...
