Use the temperature selector on the
iron to set the ironing temperature.
The temperature settings are indicated
by dots around the selector. These dots
correspond to the international care
symbols used for ironing.
At temperature levels and you
can use steam when ironing.
With temperature level the
soleplate temperature is too low for
ironing with steam. If you use this
temperature level, do not use the
steam button.
If you do, water will escape from the
steam jets.
Tip: Sort your laundry according to the
heat sensitivity of the fabric. This allows
you to iron faster: First, iron your
laundry that is made of heat-sensitive
fabric (e.g., synthetics) at temperature
level . Then, iron all laundry made of
wool or silk, using the temperature level
. Finally, iron all laundry made of
cotton and linen, using temperature
level .
Set the temperature selector to the
required temperature setting.
The indicator light on the temperature
selector will light up yellow whilst the
iron is heating up. It will go out once the
set temperature has been reached.
The iron is then ready for use.
To Next Page
Loading...
