Fault Possible cause and solution
F73
or
"Check the brew
unit"
The brew unit cannot be positioned correctly.
^
Turn the machine off with the On/Off K button.
^
Remove and clean the brew unit (see "Cleaning and care –
Brew unit").
^ Push the coffee ejector of the brew unit into the correct
position (see diagram).
^ Do not insert the brew unit. Close the appliance door and
turn the machine on with the On/Off - sensor.
This will initialize the brew unit motor and put in back into the
start position.
^
When "Insert the brew unit" appears in the display, open
the appliance door and put the brew unit back in the
machine.
Then close the door.
Frequently Asked Questions
60
To Next Page
Loading...
