Miele CM 6360 - Page 33

Preparing drinks
33
 First attach the connecting piece to
the long stainless steel tube. Make
sure that the slanted end of the
stainless steel tube is pointing
downward.
 Attach the rinse valve to the
connecting piece.
 Open the milk carton and dip the milk
siphon into the milk. Place the milk
carton to the right next to the coffee
machine.
 Connect the milk pipework to the
aperture in the central spout.
Useful tip: Rinse the milk siphon under
running water after use.
The milk flask
depending on model: CM6360,
CM6560
Milk is not cooled in the milk flask.
For high-quality milk froth, always
use cold milk (<+50°F /+10°C).
a
Connecting piece
b
Lid
c
Seal
d
Stainless steel tube
e
Glass
Preparing the milk flask
 Insert the connecting piece into the
lid from above until everything sits
flush.
 Connect the stainless steel tube to
the inside of the lid. Make sure that
the slanted end of the stainless steel
tube is pointing downward.
 Fill the milk flask with milk up to a
maximum of3/4" (2cm) below the
rim. Seal the milk flask with the lid.