EasyManua.ls Logo

Miele CM 6360 - Installation Information; Ventilation and Niche Requirements

Miele CM 6360
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation information
*INSTALLATION*
86
Danger of overheating due to
insufficient ventilation.
If the coffee machine is not
sufficiently ventilated, the appliance
can overheat.
Please ensure that there is adequate
ventilation around the coffee
machine.
Do not cover the coffee machine
with dish towels, etc. while it is in
use.
If the coffee machine is installed
behind a closed cabinet door front,
heat and moisture can build up
behind the cabinet door front when
closed. This can result in damage to
the coffee machine and/or
cabinetry.
Do not close the cabinet door while
the coffee machine is in use.
Please observe the following installation
instructions:
- The location of the appliance must be
dry and well ventilated.
- The ambient temperature of the room
in which the appliance is used must
be between +50°F (10°C) and +100°F
(38°C).
- The coffee machine must be set up
on a level surface. The surface must
be water resistant.
If the coffee machine is installed in a
niche, the niche must provide the
following minimum dimensions:
Height 20'' (508mm)
Width 17 3/4" (450mm)
Depth 21 3/4" (555mm)
When setting up the appliance: make
sure that the appliance door can be
fully opened so that the brew unit
can be removed with ease when
required.
The coffee machine must be set up in
the niche such that it sits flush with
its front edge.

Table of Contents

Other manuals for Miele CM 6360

Related product manuals