Miele CM 6360 - Operational and Performance Faults

Frequently Asked Questions
Unusual performance of the coffee machine
Problem Possible cause and solution
The display remains
dark when the coffee
machine is turned on
using
theOn/Offbutton.
The On/Offbutton was not held for long enough.
 Touch and hold the On/Offbutton for at least
3seconds.
The plug is not inserted in the socket correctly.
 Insert the plug into the socket.
The circuit breaker has tripped because the coffee
machine, voltage, or another appliance is defective.
 Unplug the coffee machine from the socket.
 Contact a qualified electrician or Miele Service.
The lighting remains off
after the coffee
machine has been
switched on.
The lighting has been switched off.
 Switch the lighting on (see “Settings” – “Lighting”).
The lighting is faulty.
 Contact Miele Service.
The coffee machine
turns off suddenly.
The factory-set switch-off time (20minutes) or the
switch-off time you have programmed has been
reached.
 If required, you can select a new switch-off time
(see “Settings – Timer”).
The plug is not inserted in the socket correctly.
 Insert the plug into the socket.
The sensor buttons do
not respond.
The coffee machine can
no longer be operated.
There is an internal fault.
 Disconnect the coffee machine from the domestic
electrical supply by removing the plug from the
socket or switching off the circuit breaker.
The display is hard to
see or not legible.
The display brightness has been set too low.
 Change this setting (see “Settings”).
71