Danger of burns!
Let the unit cool down before you
clean it, especially the water in the
drip tray.
Do NOT use a steam cleaner to
clean this unit. Doing so will damage
the unit.
Never use cleaning products that
contain sand, cleaning soda, acids,
or chlorides! They will corrode the
surface.
To avoid mold, growth and odors it is
important to clean the machine
regularly.
The main dispenser connector cap is
lubricated with silicone grease. Be
careful of your clothing when
removing or inserting containers or
other components from the inside of
the unit.
All surfaces are susceptible to
scratching. On glass surfaces,
scratches can lead to breakage.
All surfaces can become discolored
if they are cleaned with unsuitable
products.
Make sure to immediately wipe
away any splatters during
descaling.
To better maintain your appliance
avoid the following:
– cleaners containing soda, ammonia,
thinners, or chlorides
– cleaners containing descaling
agents or lime removers,
– abrasive cleaners,
– stainless steel cleaners,
– caustic (oven) cleaners,
– scouring pads, steel wool, hard
brushes,
–
eraser sponges,
–
metal scrapers.
Wipe any spills from descaling imme
-
diately!
Cleaning and care
49
To Next Page
Loading...
