^
Turn the top connecting piece a and
pull it up and off. Then pull the
bottom connecting piece b up and
off.
^ Pull off the dispensing nozzles c.
Do not remove the Y-piece.
^ Thoroughly clean all components.
^
Clean the surface of the main
dispenser with a damp sponge.
^
Now reassemble the dispensing unit
in the reverse order. Make sure that
the upper connecting piece a clicks
into place. Push the dispensing
nozzles b firmly onto the dispensing
unit.
^ Reinsert the dispensing unit.
^ Replace the cover.
Cleaning and care
54
To Next Page
Loading...
