Electrical connection
*
I
N
S
T
A
L
L
A
T
I
O
N
*
53
Disconnecting from the mains
Risk of electric shock.
There is a risk of electric shock if the
appliance is connected to the mains
supply during repair or service work.
After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the fol-
lowing depending on installation:
Safety fuses
Completely remove fuses.
Automatic circuit breakers
Press the (red) test button until the
middle (black) button springs out.
Built-in circuit breakers
Circuit breakers at least type B or C:
Switch the lever from 1 (on) to 0 (off).
Residual current device (RCD)
Switch the main switch from 1 (on) to
0 (off) or press the test button.
Replacing the power cable
Risk of electric shock from mains
voltage.
Incorrect connection to the power
supply may result in an electric
shock.
The power cable must only be re-
placed by a qualified electrician.
If the power cable needs to be ex-
changed, it must be replaced with a
special connection cable, type H05VV-
F (PVC-insulated), available from the
manufacturer or from the Miele Cus-
tomer Service Department.
The required connection data is
provided on the data plate.
To Next Page
Loading...
Need help?
General
