Miele CS 1222 - Natural Stone Worktops

Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
49
Natural stone worktops
You will need heavy duty double-sided
tape (not supplied) to secure the
spring clamps and spacer bars.
 Stick the tape to the top edge of
the cut-out in the positions shown in
the diagram.
 Position the spring clamps and
spacer bars on the top edge of the
cut-out and press them firmly into
place.
 Apply silicone to the side and lower
edges of the spring clamps and
the spacer bars.
 Then fill gap between spacer
bar and the worktop with silicone.