Miele CS 1222 - Page 51

Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
51
Connecting the ProLine ele-
ment
 Connect the ProLine element(s) to the
mains electricity supply.
 Check that each ProLine element is
working.
Removing a ProLine element
If the ProLine element cannot be ac-
cessed from below, you will need a
special tool to remove it.
 If the ProLine element can be ac-
cessed from below, push it upwards
to remove it. Push the back of the ap-
pliance out first.