Cappuccino and milk froth
When using for the first time or using
after descaling
The lines were completely drained
before the unit left the factory. They will
also be drained when the machine is
descaled. Before preparing
cappuccino or froth, the lines must be
filled with water.
^
Set a cup under the cappuccino
dispenser.
^
Select "Milk froth".
The intake hose takes in water from the
tank and fills the lines with water. A
small amount of water runs from the
froth dispenser.
Prompts to clean the froth dispenser
appear in the display.
^ Confirm by selecting "OK".
^ Once the machine stops, select "Milk
froth" again.
The froth dispenser dispenses steam
and the lines are filled with water.
^
Select "Clear" to get back to the main
menu.
The coffee system is ready to use.
Making coffee
16
To Next Page
Loading...
