Settings
ß Pre-brewing
ß Temperature
ß Automatic rinsing
^
Touch the sensor beside "Automatic rinsing".
A tick will appear to show if the Automatic rinsing option is on
or off.
^
Touch the sensor beside "On" or "Off" and then touch the
sensor beside "ok" to save the setting.
It is a good idea to set this option to "On" so that
the rinse process cannot be forgotten.
Steam system
The machine has two heating systems. This means that the
coffee machine can be used not only to prepare
espresso/coffee but also to prepare milk froth/cappuccino
using steam at any time. However, the steam system can be
switched off if the machine is rarely used to prepare milk
froth/cappuccino. This saves energy as the steam heating
system is not heated up.
If you select froth or cappuccino when the steam heating
system is switched off, the machine will not produce any
steam until it has heated itself up.
The steam heating system remains active as long as the
machine is still on.
The machine is delivered with the steam system set to On.
To switch off the steam system,
^
touch the sensor beside "Settings".
Settings
ß Temperature
ß Automatic rinsing
ß Steam system
^
Touch the sensor beside "Steam system".
A tick will appear to show if the Steam system is on or off.
^
Touch the sensor beside "On" or "Off" and then touch the
sensor beside "ok" to save the setting.
Settings: Customising your machine
40
To Next Page
Loading...
Need help?
General
