^
Dismantle the parts. Remove the part with the seals by
turning and then pulling it.
^
Wash the parts in the dishwasher. After cleaning, lubricate
the seals with the grease supplied.
Make absolutely sure that none of the small holes in the
parts are blocked (see arrow). You can knead the soft
parts to unblock them. This is important for trouble-free
operation of the machine. On no account use a needle as
this would damage the parts.
^
Reassemble the parts as shown. Make sure that the lugs
(see arrow) are underneath and
Cleaning and care
61
To Next Page
Loading...
