To program the appliance,
turn the program selector to “Program mode”.
The appliance is now in programming mode and
will respond according to the symbols shown
under the buttons.
By pressing the - or e button
– a programming option in the display window can
be highlighted with an asterisk. Press ENTER to
select the program.
– the settings of the various programming options
can be adjusted.
– a time can be entered for the Standby timer op-
tion.
By pressing ENTER
– a programming option highlighted with an aste-
risk can be selected.
– a change to the programmed settings can be
saved.
If a setting is accidentally changed, do
not press ENTER. Turn the program selec-
tor to position “0ff”. The changed setting
will not be saved and the original setting will be re-
tained.
Programming the appliance
12
To Next Page
Loading...
