Turning the pre-grinding feature on or off
When the pre-grinding feature is on, a new portion
of beans will be ground immediately after each cof-
fee is dispensed, so there is always a portion of
ground coffee ready. This saves time and is particu-
larly useful when making coffee for a number of
guests. To prevent loss of aroma, the pre-grinding
feature should be turned off when only preparing
coffee occasionally.
Turn the program selector counterclockwise to
“Program mode”.
The appliance can now be programmed and will
respond according to the symbols shown under
the buttons.
The following will appear in the display window:
Press the e button to highlight programming op-
tion “Pre-grinding” with an asterisk.
Press ENTER to confirm this programming option.
The sub-menu is shown in the display window as
follows:
Press the e button to turn the pre-grinding feature
On or Off.
Press ENTER to save this setting, or
turn the program selector to “0ff” to cancel if a
mistake has been made.
This will bring you out of the sub-menu.
Programming the appliance
20
To Next Page
Loading...
