Lubricating the brew unit
Remove the brew unit carefully.
When lubricating the brew unit make sure
it is properly positioned. For this the funnel
must be set a little higher and the socket
standing vertically (see the illustration, or the prob-
lem solving guide).
Smear a little silicone lubricant on the joints b,
the axle
c, in the tracks d and on the sealing
ring
e.
Clean the bolt b and then smear a little silicone
lubricant on it and on the joints
c.
Place the brew unit in the machine.
Cleaning and care
48
To Next Page
Loading...
