Allow all the water to empty out of the machine
via the spouts.
The system is now rinsed, removing any descaling
agent residue.
When the water container is empty, the following will
appear in the display window:
Turn the steam selector clockwise back to the
o
position and press ENTER.
If the program selector is in the “Program mode”
position, the following will appear in the display
window:
Once the appliance has been descaled
and rinsed clean of any descaling agent it
is ready for use.
Descaling manually
The water container must be at least half filled with
the correct solution of descaler and warm water.
Turn the program selector clockwise to the “On”
position (with or without lighting).
Place a large container under the hot water
spout.
Descaling the machine
54
To Next Page
Loading...
