Place a large container under the steam spout
and turn the steam selector counterclockwise.
Press the hot water button d.
Dispense a small quantity of descaling agent
from the hot water spout and the steam spout.
Then turn the water off.
Leave the descaling agent for approximately two
minutes to take effect. Repeat the process until
the water container is empty.
The hot water spout, steam spout and the system
are now descaled.
Fill the water container with fresh, cold water and
place it in the machine.
Place the empty containers under the hot water
and steam spouts. Press the hot water button d
and turn the steam selector counterclockwise.
Dispense all the water through the spouts until
the water container is empty.
Once the appliance has been descaled and rinsed
clean of any descaling agent it is ready for use.
Descaling the machine
55
To Next Page
Loading...
