Capsule carousel and
carousel runners
^ Open the front of the coffee machine.
Pull the carousel runners out as far as
possible and remove the capsule
carousel.
^
Lift the carousel runner up at the front
a little and then pull it out completely.
^
Clean the capsule carousel and
carousel runners by hand using hot
water and a little washing-up liquid.
Dry all parts thoroughly and replace
them.
^
Also clean the area under the
carousel runners.
It is particularly important to clean
the sensor which is used to recog-
nise the capsule chambers as well
as the recess in the floor.
^ Dry everything with a soft cloth.
^ Place the carousel runners on the
guide rails.
^ Insert the capsule carousel.
^
Push the carousel runners with the
capsule carousel fully back into the
machine.
Cleaning and care
49
To Next Page
Loading...
