Cleaning and care
64
Pull the brew unit to the side first
and then tilt to the front. Pull the
brew unit forwards to remove it.
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (See
“Problem solving guide”).
When you have removed the brew
unit, do not change the position of
the handle on the brew unit.
Otherwise the brew unit cannot be
refitted.
Clean the brew unit by hand under
warm running water without using
washing-up liquid or any other
cleaning agent.
Wipe any remaining coffee residues
from the filters. One filter is located in
the funnel and the other to the left of
the funnel.
Coffee powder falls onto the drip tray
when the brew unit is removed.
Remove the drip tray and clean the
lid.
Clean the interior of the coffee
machine. Use your vacuum cleaner to
remove dry ground coffee residues.
Adding a cleaning tablet to the brew
unit
Drop a cleaning tablet into the top of
the brew unit (arrow).
Push the brew unit with cleaning
tablet back into the coffee machine.
To Next Page
Loading...
Need help?
General
